單片機C語言實例-127-PS2鍵盤輸入1602液晶顯示

嘻嘻哈哈123 · 發表于 2022-1-12 11:00:54

單片機C語言實例-127-PS2鍵盤輸入1602液晶顯示

內容：
  引腳定義如下：1-VSS 2-VDD 3-V0 4-RS 5-R/W 6-E 7-14 DB0-DB7 15-BLA 16-BLK
------------------------------------------------*/
#include "1602.h"
#include "delay.h"

#define CHECK_BUSY

sbit RS = P2^4; //定義端口
sbit RW = P2^5;
sbit EN = P2^6;

#define RS_CLR RS=0
#define RS_SET RS=1

#define RW_CLR RW=0
#define RW_SET RW=1

#define EN_CLR EN=0
#define EN_SET EN=1

#define DataPort P0

/*------------------------------------------------
            判忙函數
------------------------------------------------*/
bit LCD_Check_Busy(void)
{
#ifdef CHECK_BUSY
DataPort= 0xFF;
RS_CLR;
RW_SET;
EN_CLR;
_nop_();
EN_SET;
return (bit)(DataPort & 0x80);
#else
return 0;
#endif
}
/*------------------------------------------------
            寫入命令函數
------------------------------------------------*/
void LCD_Write_Com(unsigned char com)
{
while(LCD_Check_Busy()); //忙則等待
RS_CLR;
RW_CLR;
EN_SET;
DataPort= com;
_nop_();
EN_CLR;
}
/*------------------------------------------------
            寫入數據函數
------------------------------------------------*/
void LCD_Write_Data(unsigned char Data)
{
while(LCD_Check_Busy()); //忙則等待
RS_SET;
RW_CLR;
EN_SET;
DataPort= Data;
_nop_();
EN_CLR;
}

/*------------------------------------------------
            清屏函數
------------------------------------------------*/
void LCD_Clear(void)
{
LCD_Write_Com(0x01);
DelayMs(5);
}
/*------------------------------------------------
            寫入字符串函數
------------------------------------------------*/
void LCD_Write_String(unsigned char x,unsigned char y,unsigned char *s)
{
if (y == 0)
{
   LCD_Write_Com(0x80 + x);    //表示第一行
}
else
{
LCD_Write_Com(0xC0 + x);    //表示第二行
}
while (*s)
{
LCD_Write_Data( *s);
s ++;
}
}
/*------------------------------------------------
            寫入字符函數
------------------------------------------------*/
void LCD_Write_Char(unsigned char x,unsigned char y,unsigned char Data)
{
if (y == 0)
{
LCD_Write_Com(0x80 + x);
}
else
{
LCD_Write_Com(0xC0 + x);
}
LCD_Write_Data( Data);
}
/*------------------------------------------------
            初始化函數
------------------------------------------------*/
void LCD_Init(void)
{
LCD_Write_Com(0x38); /*顯示模式設置*/
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
DelayMs(5);
LCD_Write_Com(0x38);
LCD_Write_Com(0x08); /*顯示關閉*/
LCD_Write_Com(0x01); /*顯示清屏*/
LCD_Write_Com(0x06); /*顯示光標移動設置*/
DelayMs(5);
LCD_Write_Com(0x0C); /*顯示開及光標設置*/
}

更多詳情參考附件文檔

游客，如果您要查看本帖隱藏內容請回復